Strict Standards: Declaration of SkinxPL::initPage() should be compatible with Skin::initPage(OutputPage $out) in /home/xplteam/public_html/wiki/skins/xpl.php on line 7
Install the xPL Monkey Windows xPL Hub - XPLProject

Contents

Introduction

An xPL hub is the most important part of a Windows xPL installation. Without a hub installed, no other xPL applications will work. The hub listens for xPL messages on the network and relays them to all xPL applications that are connected to it. This allows more than one xPL application to run on a single PC but a hub is required even if you only want to run one xPL application on your PC. For more information on hubs, please see the hub section of the FAQ.

This HowTo guides you through the installation of the xPL Monkey xPL hub. This hub does not require the .NET framework, and will automatically run as a Windows Service or as a console application depending on the version of Windows being used.


What You Need

A PC running Windows 98 or later


Downloading the Software

Download the installation package from http://www.xplmonkey.com/downloads/xplhub.msi (232KB)


Installing the Software

  • In WIndows Explorer, double-click the file xplhub.msi.
HubHowTo1.gif
  • Click the "Next" button.
HubHowTo2.gif
  • Select the "I Agree" option, then click the "Next" button.
HubHowTo3.gif
  • Select the "Everyone" option, then click the "Next" button.
HubHowTo4.gif
  • Click the "Next" button.
  • Installation takes a few seconds.
HubHowTo5.gif
  • Click the "Close" button.

Congratulations, The xPL Hub is now installed.

This page was last modified on 30 November 2005, at 21:33. This page has been accessed 8,924 times.